SS Wire Standard | ASTM A580, A313, A555, A493 / ASME SA580, SA313, SA555, SA493, AMS 5514 |
---|---|
Stainless Steel / Wire Dimensions | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
SS Wire Length | Cut Lengths: 0.125" to 72" No Limit on Spooled Lengths |
SS Wire Diameter | 0.0004" to 0.040" 10 microns to 1.0 mm Other Sizes on Request |
Wire Density | 8.89 g/cm3 |
|
580-750 |
|
as standard |
|
28-30 |
Surface | Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated |
Tempers | Tempers range from dead soft annealed to ultra spring temper |
welded wire mesh | Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch Roll Length: 100feet or 150feet |
wire mesh weaving methods | plain weave, twill weave, dutch weave |
Wire Technique | Cold Rolled, hot rolled |
Wire Condition | M, Y, 1/2Hard |
Offered in a wide range of packages including: |
Spool Reel Coil Bobbin Carrier Custom packaging provided from as low as 1lb to 200lb tapered plastics |
Wire available in form of | Filler Wire, Flat Wire, Coil Wire, Electrode Wire, Welding Wire, Wire mesh, Knitted wire mesh, filter mesh, mig wire, tig wire, spring wire, stranded and twisted wire |
Test Certificates |
Wire Tensile Testing Wire Hardness Testing Metallographic Inspection / Investigation Corrosion Testing for Wire Chemical Analysis for Wire Alloy Verification Wire Wrap Testing Wire Elevated Temperature Testing Stress Rupture Testing (Creep) |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Standard | Description |
ASTM A580 | Standard Specification for Stainless Steel Wire |
ASTM A581 | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
ASTM A313 | Standard Specification for Stainless Steel Spring Wire |
ASTM A368 | Standard Specification for Stainless Steel Wire Strand |
ASTM A478 | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
ASTM A492 | Standard Specification for Stainless Steel Rope Wire |
ASTM A493 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
ASTM A555/ | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
ASTM A581 | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
ASTM A1022 | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
ASTM F138 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Wire for Surgical Implants |