Stainless Steel 904L Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM B625 / ASME SB625 |
| Thickness | : | 4mm-100mm |
| Width |
: | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Types of Stainless Steel 904L Sheets, Plates & Coils
| Stainless Steel 904L Polished Plates | SS 904L Polished Plates 904L SS Polished Plates 904L Stainless Steel Polished Plates SS UNS N08904 Polished Plates SS WERKSTOFF NR. 1.4539 Polished Plates ASME SB625 904L Polished Plates |
| Stainless Steel 904L Hot Rolled Plates | SS 904L Hot Rolled Plates 904L SS Hot Rolled Plates 904L Stainless Steel Hot Rolled Plates SS UNS N08904 Hot Rolled Plates SS WERKSTOFF NR. 1.4539 Hot Rolled Plates ASTM B625 904L Stainless Steel Hot Rolled Plates |
| Stainless Steel 904L Cold Rolled Plates | SS 904L Cold Rolled Plates 904L SS Cold Rolled Plates 904L Stainless Steel Cold Rolled Plates SS UNS N08904 Cold Rolled Plates SS WERKSTOFF NR. 1.4539 Cold Rolled Plates ASTM B625 904L Stainless Steel Cold Rolled Plates |
| Stainless Steel 904L Coils | SS 904L Coils 904L SS Coils 904L Stainless Steel Coils SS UNS N08904 Coils SS WERKSTOFF NR. 1.4539 Coils B625 904L Stainless Steel Coils |
Types of Stainless Steel 904L Sheets, Plates & Coils
SS 904L Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Cu |
| SS 904L | 0.020 max | 2 max | 1.00 max | 0.040 max | 0.030 max | 19.00 – 23.00 | 4.00 – 5.00 max | 23.00 – 28.00 | 1.00 – 2.00 |
Stainless Steel 904L Sheets, Plates & Coils Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.95 g/cm3 | 1350 °C (2460 °F) | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 | 35 % |
Equivalent Grades for 904L Stainless Steel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5 | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
